Покупал я давеча у китайцев TRRS 3.5 взамен почившего и мне повезло наткнуться на более редкую его разновидность с длинной гильзой. О чем я понял уже когда он ко мне пришел.
Поскольку с гнездом они частично совместимы для себя я нашел...
...решение вопроса.
Но встал вопрос, а как их вообще отличать? По фото понятно, но они не всегда есть, а
стандартизирующий документ я нашел только на первый тип штекера от Japan Electronics and Information Technology Industries Association (JEITA).
А про второй, только короткое упоминание в буржуйской вики
Equipment requiring video with stereo audio input/output sometimes uses 3.5 mm TRRS connectors. Two incompatible variants exist, of 15 millimetres (0.59 in) and 17 mm (0.67 in) length, and using the wrong variant may either simply not work, or could cause physical damage.
Attempting to fully insert the longer (17 mm) plug into a receptacle designed for the shorter (15 mm) plug may damage the receptacle, and may damage any electronics located immediately behind the receptacle. However, partially inserting the plug will work as the tip/ring/ring distances are the same for both variants.
Using the shorter plug in a socket designed for the longer connector will result in the plug not 'locking in', and may additionally result in wrong signal routing and/or a short circuit inside the equipment (e.g. the plug tip may cause the contacts inside the receptacle – tip/ring 1, etc. - to short together).
The shorter 15 mm TRRS variant is more common and fully physically compatible with 'standard' 3.5 mm TRS and TS connectors.
Знает кто какой документ описывает второй коннектор?
И ещё интересно зачем это разнообразие было нужно?